-
Aeration Units
Position these three lightweight aeration units in the room to create a dynamic airflow, and help distribute the vapor during a cycle. After the bio-decontamination part of the cycle is complete, the aeration units quickly break down the hydrogen peroxide vapor into water vapor and oxygen, leaving no residue or harsh odors behind. -
Lectern
Placed outside the patient room, the lectern communicates wirelessly with the vaporizer and aeration units. The simple three-button control panel makes it easy to start a cycle. -
Vaporizer
Fast, automated and lightweight, the vaporizer disperses the hydrogen peroxide vapor onto all exposed surfaces.
Bioquell BQ-50
Use Ecolab’s Bioquell BQ-50, a hydrogen peroxide vapor bio-decontamination system in patient rooms and hospital-wide. The Bioquell BQ-50 uses hydrogen vapor generated by Bioquell Hydrogen Peroxide Sterilant to produce a 6-log sporicidal kill on exposed surfaces.
Bioquell technology helps you reduce the bioburden in your hospital and put your organization’s infection-prevention goals within reach.
EPA Reg. No. 72372-1-86703
Features of Bioquell BQ-50
Why Choose Bioquell BQ-50
Adaptable
Easily transport the lightweight system around your facility. Simple, rapid setup in any area.
Effective
Uses Bioquell Hydrogen Peroxide Sterilant to achieve a 6-log sporicidal kill on exposed surfaces within an enclosed area.
EPA Reg. No. 72372-1-86703
Efficient
Rooms are ready for use immediately post-cycle. There is no need for any further steps such as an additional wipe down to remove residue.
Training
Bioquell specialists will train your staff on-site, with refresher courses if needed. Your staff will learn to run a cycle with verification methods, and review important safety factors.
Use Bioquell Hydrogen Peroxide Vapor Technology in Many Areas of Your Hospital
Use the Bioquell BQ-50 to Bio-Decontaminate:
Use the Bioquell BQ-50 to Bio-Decontaminate:
- Operating rooms, where surgical patients are vulnerable to infection
- Critical care units, which have immunocompromised patients
- Specialized units including burn, transplant, NICU and endoscopy
Wondering if the Bioquell BQ-50 is right for your organization?
Related Products
Bioquell Hydrogen Peroxide Sterilant
Bioquell Hydrogen Peroxide Sterilant
This is a 35% aqueous hydrogen peroxide solution used in Bioquell technology to generate hydrogen peroxide vapor, which achieves a 6-log sporicidal kill on exposed surfaces.
EPA Reg. No. 72372-1-86703
Biological Indicators (BIs)
Our biological indicators are made from Geobacillus stearothermophilus endospores to help you validate a Bioquell bio-decontamination cycle.
Bioquell Room Chemical Indicators (CIs)
Confirm that a Bioquell cycle has achieved the expected vapor distribution and exposure performance with these easy-to-read chemical indicators. A chemical strip reacts to a Bioquell cycle and changes color to correlate with the cycle’s expected efficacy. For use in rooms and enclosed areas 10m3 and larger.
Use Even on Sensitive Electronics and Equipment
Bioquell Hydrogen Peroxide Sterilant vapor is tough on microbial surface contaminants, but has no ill effects on sensitive electronics. Unlike some spray-and-wipe methods, there are no additional steps to remove residue. When you need to bio-decontaminate spaces that contain hard-to-clean equipment, Bioquell is ideal. Before using Bioquell on your electronic equipment, check with the manufacturers to confirm compatibility.
EPA Reg. No. 72372-1-86703
Get in Touch with Us
GIVE US A CALL
Ecolab Life Sciences
1 Ecolab Place
St. Paul, MN 55102
Please speak to your Ecolab account manager for further information, call +1-800-659-3764.
Contact Ecolab Life Sciences
Thank you for your interest in our product and services.
Explore Our Bioquell Hydrogen Peroxide Vapor Systems and Services
placeholder
Bioquell Rapid Bio-decontamination Services (RBDS)
This all-inclusive service handles every aspect of bio-decontamination in your facility....